- COMPATIBLE WITH PRUSA XL – Create a stable environment for your Prusa XL with the SUMO Enclosure. By fully enclosing your Prusa XL, you will notice a reduction in noise, a more stable and reliable printing environment, and added safety for children or pets that may enter the printing area.
- UPGRADE YOUR PRUSA XL – If you are looking to upgrade your Prusa XL, this is the perfect enclosure kit for you. Made to fit the Prusa XL without increasing space requirements, the SUMO Enclosure is one of the most space effecient ways to enclose your Prusa XL while still maintaining great visibility and accessbility to the prints.
- HYGROMETER INCLUDED – Included in the SUMO Enclosure is a hygrometer for monitoring both the humidty inside of the printer as well as the internal temperature. Compatible with a free printed part, this hygrometer can be easily posiitoned inside of the top middle support at the front of the SUMO 3D Printer Enclosure for easy viewing.
- 650MM x 525MM x 935MM (25.6″ x 20.7″ x 36.8″) SIZE – By custom designing the SUMO Enclosure to fit onto the Prusa XL, the size that Prusa XL requires does not significantly change when adding the SUMO Enclosure to the Prusa XL. The Upper Chamber does extend approximately 10cm above the filament lines in order to allow for various object to be hung from the ceiling (such as fire alarms, cameras, etc).
- REMOVABLE UPPER CHAMBER – In order to allow for easy access for maintance and troubleshooting, the SUMO Enclosure Upper Chamber is fully removable from the enclosure with ease. Additionally, the SUMO Upper Chamber is compatible with many accessory prints for mounting useful accessories for organzing your 3D printing workspace.
- COMPATIBLE WITH 120MM NOCTURA FANS – The SUMO Enclosure features a cutout on the back panel of the Upper Chamber of plexiglass for adding a 120mm Noctura fan for temperature control of your Prusa XL 3D Printer. If you prefer to print without a fan, a cover for the cutout can be printed and use to fill the cutout at the back of the 3D printer enclosure.
- WYZE CAM V3 OR TP LINK FOR REMOTE MONITORING – Monitoring your Prusa XL can be challenge since a camera is not built in to the Prusa XL With the SUMO 3D Printer Enclosure, we have added a simple corner adapter so that you can add a WYZE CAM V3 or TP LINK camera to your enclosure for monitoring your printer remotely.
- REMOVABLE CORNER GUARDS FOR ADDED SAFETY – The plexiglass corners at the top of the SUMO 3D Printer Enclosure can be sharp – to prevent unwanted harm, removable corner guards are available to cover the corners of the enclsoure for added safety.
- HEPA FILTER FOR AIR FILTRATION – If you print with materials that cause fumes, we have created an adapter so that you can add a HEPA filter in addition to a 120mm fan to your SUMO 3D Printer Enclosure. With the SUMO 3D Printer Enclosure, a filter mount made for an economical HEPA filter can be easily added to the 120mm fan setup.
- 4 INCH DUCT FOR VENTING FUMES – If you prefer to externally ventilate your 3D printer, the SUMO 3D Printer Enclosure has an adapter for the 120mm fan setup so that you can vent the fumes from your 3D printer enclosure using a 4 inch duct.
| Manufacturer | Willis Worxs, LLC |
|---|---|
| Part number | DELACK_V1 |
| Item Weight | 9.07 kg |
| Product Dimensions | 55 x 48.6 x 45 cm, 9.07 kg |
| Item model number | DELACK_V1 |
| Colour | Clear |
| Material | Acrylic |
| Item Package Quantity | 1 |
| Included components | x10 2mm x 6mm x 20mm magnets + x20 D6H5mm magnets, x1 USB A/C thumb drive, x1 hygrometer, x9 3mm plexiglass panels, SUMO Fastener Set – x150 M5x12mm bolts, x6 M5x85mm bolts, x100 M5 nuts, x50 M5 scrapnel nuts, x20 rubber plugs, x10 dowel rods, x8 10mm hex metal rods, x1 allen wrench |
| Batteries included | No |
| Batteries Required | No |
| Date First Available | 17 May 2024 |
Forrest V. –
this was a good enclousre…
Frank J. Welte –
The Sumo enclosure for my…
Frank J. Welte –
Great design! Printed on…
S. Nelson –
You pay $300+ to have the…
S. Nelson –
This kit is a great…